New Portable Hardness Tester is different from Ultrasonic thickness
Tester with multi-point calibration to precision
This hardness tester is designed for testing metallic materials,
the hardness of which ranges from very low to very high values.
Hardness testing can be performed directly on-site and in any
position. Typical applications are large, heavy workpieces which
could only be transported to a hardness testing machine in a
laboratory with great difficulty. It is especially suitable for
applications in which standard indentation hardness testing is
either not feasible or not economical.
This hardness tester comprises an indicating device and an impact
device. It is based on the rebound hardness testing method
according to Leeb. It is for testing the hardness of all material
surfaces over a large range of hardness quickly and independently.
Wide measuring range
Based on the principle of Leeb rebound testing method, it can
measure the hardness value of all metallic materials. It can also
measure the tensile strength of many metallic materials.
Support seven types of impact device. Type of impact device
Impact direction correction
Impact direction automatically detected and corrected (after base
calibration, except type G) , high measuring accuracy in every
impact direction, convenient measurement in any position.
Integrated conversion of the measured values to other popular
hardness scales, e.g. HRC (Rockwell), HRB, HV (Vickers), HB
(Brinell), HS (Shore), HL (Leeb), Rm (Tensile strength for steel).
Base calibration function and multi-point calibration function.
HLX conversion function
HLX conversion function to convert HLD values to HLC, HLG, HLDL and
HLD+15, and vice versa.
Upper and lower limit can be set. It will alarm automatically when
the test value exceeding the limit.
Color TFT display (320×240 TFT LCD) with adjustable backlight,
allow the user to work at worksites with low visibility.
Integrated memory – Non-volatile, 500 series of measured values
including each individual measured value, mean value, testing date,
impact direction, impact times, material and hardness scale etc..
Two AA size alkaline batteries as the power source. Continuous
operating period of no less than 100 hours (default brightness
setting). Display Standby and Auto Power Off functions to save
Real time clock
The instrument clock keeps running tracking the time.
USB communication port. Online transfer of the measured data to PC
or laptop via USB.
Built in Bluetooth module. Print test report wirelessly.
Robust design allow the user to work at dusty worksites .
The error and repeatability of the test value see the following
|No.||Impact Device||Hardness value of the test block||Measuring accuracy||Measuring Repeatability|
|±12 HLDL||12 HLDL|
|±12 HLD+15||12 HLD+15|
|±12 HLG||12 HLG|
|±12 HLE||12 HLE|
|±12 HLC||12 HLC|
- Measuring range:170 to 960 HLD
- Impact direction:360°. Auto detecting direction capability.
- Built in conversion table from(to) HLD to(from) HLC,HLG,HLDL,HLD+15
- Hardness Scale:HL,HB,HRB,HRC,HV,HS
- Display:color TFT LCD,320×240 dots, adjustable backlight
- Display of mean value, minimum value and maximum value.
- Integrated data memory: 500 measurement series.
- Battery: two AA size, 1.5 Volt alkaline batteries
- Continuous operating period:about 100 hours(with default
- Communication:USB1.1; PC software is provided to transfer data
between the instrument and PC.
- Bluetooth support.
- Multiple display languages (English, Chinese, etc.).
- Weight: Approximately 220g.